Iconen_Geo-matching_zondertekst5

 

 

Land Surveying and Cadastre                           

 

Ask for a quote
Visit website
Find dealers / rentals

Write a review

SteadyTrack STX Sensor Mount


 
General 
Product Name:SteadyTrack STX Sensor Mount
Product Description:
Year of initial development:
Stabilization system type: open circular gimbal
Applied Standards:
Operation Area:Airborne
Performance 
Pitch [°]: +/-10
Roll [°]: +/-10
Yaw/Drift / [°]: +/-25
Residual angular rate of the horizontal axes [°/s rms:
Residual deviation of the horizontal axis [° rms]*:
Residual deviation of the vertical axis [°rms]*:
Repeatability [arc seconds]:
Vibration isolation system:
Other:The STX21 mount is essentially mechanical, there are no electronics, gyro’s or IMU’s attached. The electronics necessary for the operation of the mount is contained in a separate housing called the STX controller. The STX controller must be connected to an IMU, like an Applanix or a Novatel. The controller uses the IMU attitude output data to level the mount in real time. Note that this mount will only work if your sensor system uses an IMU and if the IMU data can be sent to the STX controller.
Interfaces / Software 
Communication ports:
Software options:
Storable settings:
FMS compatibility:If required the STX controller can be expanded at will by adding a number of modules such as the Track’Air Flight Management module, an Applanix AP IMU module, a Riegl Lidar control module, etc.
Mechanical characteristics 
Platform length [mm]:
Platform width [mm]:
Platform height [mm] :
Platform weight [kg] :
Payload weight (max) [kg] :
External control unit weight [kg] :
Usable diameter [mm] :
Sensor compatibility:The STX is currently produced in 10, 17, 19 and 21 inches and can be manufactured on demand in any size, even larger sizes, as long as it fits within the width of the airplane.
Electrical characteristics 
Min input [V]:
Max input [V]:
Min pre-fuse rating [A]:
Maximum pre-fuse rating [A]:
Typical power consumption [W]:
Max power consumption [W]:
Minimum battery size (if applicable):
Maximum battery size (if applicable):
Environment 
Min operating temp [°C] :
Max operating temp [°C]:
Min storage temp [°C] :
Max storage temp [°C] :
Max elevation [m]:
Humidity:
Other:
More information 
Distinguishable features:Contrary to other mount designs, the STX open circular gimbal allows the sensor system to be fixed into the mount so as to be as low as possible above the airplane hole.
Typical applications:
Rotary encoder type:
Regulations:
 


Ask for a quote
Visit website
Find dealers / rentals


Supplier Information

 

 

Other products in Gimbals and Mounting Systems